Brotje novopellet spk 24 can't start !!!

[Mantas]

But then fire goes on "ABGAS" sensor show temperature. https://drive.google.com/file/d/0B-1bjOgtpchGQ3RJSUdRS0tUcUE/view?usp=sharing
Is i am entering 1919 code correct ,i asking because then i enter code nothing happen ,
and then i cut power and turn on again it shows same 24 KW in version

 

[broetjespkfan]

...when you wrote 1919 ...next you have min 2sec tip the enter buttom to confirm 24kw
after that on display stand "Auf werkseinstellung zurückgesetzt" in english "reset system"
after that with the up buttom go out.
move it and come again

after a working reset stand in "Version" 0 Betriebsstunden (zero Workinghours)

 

[Mantas]

I make reset in menu "Version" with buttons "-","+"and "E". it not same ?


Um die Werkseinstellungen wiederherzustellen, müssen im Menü
VersiondieTasten„ “,„+“und„-“gleichzeitgedrücktwerden.

Hinweis: Eine Wiederherstellung der Werkseinstellungen kann nur
erfolgen, wenn am Kessel keine Wärmeanforderung ansteht und
die Abbrandzeit beendet ist.

 

[broetjespkfan]

ok that is a different reset from the information paper.
i have 2 SPK
never is a reset going with push the 3 buttons E - +
only that way
make ISR no fire signal
go technikerebene and tip code 1919 in it.
confirm with E button min 3 sec
on display come a new screen with confirm reset
go out witout E buttom only with the up buttom
check it out
have you the brötje info map in english polish or only in german?

 

[Mantas]

I have just in german
I try tomorrow to reset .
Maybe you have service manual SPK ?

 

[broetjespkfan]

in "version" you can change the languarge
my models have only german french and danmark
checkout yours.. be carefull with enter

i give you next time an emailadress from brötje direct
brötje can send you manual in english in pdf script
i write in german the mail to you and you send copy to brötje
second
i have a telefon number from brötje hotline
i send it too.
okay take tomorrow a reset and come again

 

[Mantas]

OK . Thanks a lot

 

[GreenRabbit]

Hi!
Meine Erfahrung sagt, dass diese "Hütchen" in der Technikerbende 2 ebenfalls auftauchen!
Dort kann man sie mit ENTER auf entsprechender Stelle löschen, oder aber die Regelung komplett zurück setzten!

WIe gesagt.......meine Erfahrung sagt, dass es ein Softwareproblem bzw. ein Rechenfehler der Software ist!

-GR-

 

[broetjespkfan]

.....on you tube is a video, search this number :
DSCI0348
i am not a filmstar, but you can see the confirm of reset
...

 

[Mantas]

thanks you for video . try do same like you but i can't reset look video https://drive.google.com/file/d/0B-1bjOgtpchGcUxtUUZ3czJlR3M/view?usp=sharing

 

[GreenRabbit]

Hi!
OK....than you don´t have the actually Software.....
​The heater must be in "AUS" Mode..... then go to "VERSION" an press + / - / E at the same time for a few seconds.....
Then you´ll have the factory reset.....
​

 

[broetjespkfan]

..on your video in sec 8
i can see your exhaust sensor defently not working !!!

make a reset like green rabbit.
after that check in Technikerebene the sensor function please.

when he is not working check the cable stuff.
.....

 

[broetjespkfan]

zu green rabbit:
Bevor Der BDR Werkstechniker das I/O Update mit neuer Software durchführte,
funktionierte bei mir der Reset, so wie im Handbuch nicht.
Vielleicht gab es noch weitere Software Stände ???
Mal sehen ob es bei dem 24er klappt.
....

 

[Mantas]

I make reset - https://drive.google.com/file/d/0B-1bjOgtpchGX0xzRnlRYmQ4QXc/view?usp=sharing

then i start kessel "Abgas" start show temp https://drive.google.com/file/d/0B-1bjOgtpchGQ3RJSUdRS0tUcUE/view?usp=sharing

i think "Abgas" not showing - degree then i start kessel and heat goes it show temperature.i have -3 degree in place now

 

[broetjespkfan]

good news.
exhaust 3°C is okay.
The problem was this sign "^^^^".
it's a sign for not working.

and now start the heater

 

[Mantas]

But Kessel in "Kessel ein" mode still not working

 

[broetjespkfan]

..... have you an fire sign at ISR on the right display ?
make the sun symbol on
Kessel ein is only power on not a start.
They starts only with an order from isr

 

[Mantas]

yes i have fire sign at ISR on the right display but kessel not working

 

[broetjespkfan]

..is he going in "Abschaltung" again?
or is he doing nothing?

 

[Mantas]

yes it not work yet "abgas" temp 3 showing then starting but then "Abschaltung"